Allmarc Industries Private Limited
Kathwada, Ahmedabad, Gujarat
SEND SMS
SEND EMAIL
Product Details:
| Material | MS IS2062: E2350,Pre galvanised IS 277 |
| Height | 150, 175, 200 mm |
| Width | 230, 250, 280, 300 mm |
| Length | 1000 to 3000 mm |
| Sheet thickness | 1.6, 1.8, 2.0 mm |
| Surface finish | Painted, Zinc Coated, Hot Dip Galvanised |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Steel |
| Weight | 0.65-1.5 Kg |
| Surface Type | Hot Dipped Galvanized |
| Standard | EN-74 / BS-1139 |
Additional Information:
Product Details:
| Standard | BS-1139 / EN-74 |
| Material | Steel |
| Surface Type | Available in Zinc plated and Hot Dip Galvanized finish |
| Tube Size | 48.3mm x 48.3 mm |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Maximum Span between two Beam Bracket is suggested | 1 Metre |
| Per span maximum | 2 workers can work |
| Standard size is suitable for beam size | 50/75/100 mm |
ALLMARC INDUSTRIES is a Leading Manufacturer and Exporter of Beam Brackets. Theys are commonly attached to a steel beam / girder. A worker, wearing a full-body harness and using a connecting device such as a shock-absorbing lanyard or self-retracting lifeline (SRL), connects to the lifeline of the system. The worker can then safely move horizontally.
Beam Bracket is designed to be installed on a Various range of steel beams. This System Prevents workers falling from the top of high-rise stage / construction site. Customisation is possible as per Client’s Requirements.
Additional Information:
Product Details:
| Surface Type | Hot Dipped Galvanized |
| Material | Pressed steel body and drop forged steel cap |
| Suitable for plank thickness range of | 5 to 38 mm |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Minimum Tightning Torque | 54 Nm |
| Working Load Limit | 6.25 kN Resistance to slip along tube or along flange of Beam |
| Standard Sizes according to Beam | 50,75,100 mm |
Additional Information:
Product Details:
| Surface | Galvanized |
| Working load Limit | 6.25 kN Resistance to Slip along tube or along glange of beam |
| Standard | EN-74 / BS-1139 |
Additional Information:
